TIMING TOOLS

SET 4 TOOLS VOLKSWAGEN AND AUDI REPAIR
3032 Puller, Gauge Holder, Cam Setting Bar and Lock Pin Numbers 3032, 2066, 2065a and 2064

These 4 tools are required for timing belt replacement and fuel injection pump timing, as well as fuel injection pump removal on pre-TDI Volkswagen, Audi, and Volvo Diesels some applications include: both 4 cylinder and 5 cylinder versions using Bosch mechancial diesel injection from 1977 to 1995.

3032 Puller that safely removes the injection pump sprocket. Removal of the sprocket using other methods will damaged the bushing in the end of the injection pump, ruining the injection pump. This tool is placed through the smaller holes in the sprocket, rotated until the slots in the 2 tool pins lock into the sprocket, and then the center bolt is tightened. Once the tool is tightened down, a firm strike with a hammer on the end of the tool will shock the sprocket loose, if the sprocket does not pop free on its own. There will be a woodruff key in the end of the injection pump shaft, so use caution that this does not fall out, and down into the interior of the timing belt cover.

2066 Diesel Tool used for accurate adjustment of Bosch diesel injection pump. This Dial Gauge Holder screws into the back of the injection pump and comes equipped with a 10cm dial indicator extension pin. This tool is to be used in conjunction with a dial indicator.(not included).

2065a Diesel Cam Shaft Locking Plate for securing the cam shaft from rotating and maintaining correct timing position during R&R of cam shaft drive belt. Applicable: All VW/Audi diesel and Volvo 6 cylinder 2.4L diesel 81-86 engines.

2064 Lock Pin for Diesel for securing Bosch diesel injection pump sprocket from rotating during R&R of cam shaft drive belt. This Locking Pin also assists in locating the general timing position of pump. Number 2064 Applicable Diesel Engine: 1V, 1Z, AAB, ACV, AHU, ALH, AWP, AWV, CS, CY, DE, MD, ME and MF. D24 engine in all pre-99 Volvo diesel. Including Penta Marine Diesel.

Please check your manuals for the tool numbers 3032, 2066, 2065a and 2064.
You will get all 4 tools with this purchase (directly above)








SET 2 TOOLS VOLKSWAGEN AND AUDI REPAIR
Cam Setting Bar and Lock Pin Numbers 2065a and 2064

2065a Diesel Cam Shaft Locking Plate for securing the cam shaft from rotating and maintaining correct timing position during R&R of cam shaft drive belt. Applicable: All VW/Audi diesel and Volvo 6 cylinder 2.4L diesel 81-86 engines.

2064 Lock Pin for Diesel for securing Bosch diesel injection pump sprocket from rotating during R&R of cam shaft drive belt. This Locking Pin also assists in locating the general timing position of pump. Number 2064 Applicable Diesel Engine: 1V, 1Z, AAB, ACV, AHU, ALH, AWP, AWV, CS, CY, DE, MD, ME and MF. D24 engine in all pre-99 Volvo diesel. Including Penta Marine Diesel.

Please check your manuals for the tool numbers 2065a and 2064 (above)






 
 
For the Bosch Diesel Injection Pump


PRICE $69.50
This is the best price you will find for Dial Indicator tools.
It is very difficult to find a decent quality indicator with an 8mm shank.
Other sets you see on the market cost more and most of the sets you find may have the SAE Dial Indicator.

The Indicator has an 8mm shank (8mm crucial for fitting into most popular holders)

Accurate to .01mm (more than adequate for the job)

Metric Dial Indicator (you need for foreign vehicles)

The right tool for timing Bosch VE injection pumps on VW and Audi diesels.

Includes Metric Dial Indicator, plus holder, plus extension pins (2)

Includes M8, M10, and M12 adapters.

For use on Bosch diesel injection systems especially on VW and Audi engines: DE, MD, ME, MF, 1V, 1Z, AAB, AAZ, ACV, AHU, ALH, AWP, AWV, CS, CY.
These engines can also be found in diesels used in Industrial applications such as farm, light industrial, etc.
The Bosch diesel pumps can also be found on Volvo Marine diesel (Penta) and BMW diesel engines found in pre-1993 BMW diesel vehicles.

The Holder screws into the back of the injection pump
(picture) giving an accurate reading necessary for setting the correct pump timing.
This tool set makes the job of precisely setting of the Bosch diesel fuel injection pump easy.
This gauge makes the timing easy to set, since the timing has a range from 0.83mm to 1.15mm.
You will appreciate the quality of this product for the price - It is also a general purpose tool used for flywheel end play,
brake run-out, or other applications which require accurate measurements. $$ You will save lots of money by doing your own diesel tuneups!

Note FYI: Universal conversion factor for milimeters into decimal inches is .03937 EXAMPLE: 13mm X .03937= .5118

Here is a link to several online conversion calculators.)

This dial indicator would normally be used with Volkswagen tool number 2066 (or SIR NUMBER VA6015).

dial gauge, dial gage, guage, dial indicator, probe indicator, Dial test, indicator, auto tool, automotive tools, special diesel tools, tolerance, runout, run-out, end play, clearance, measure, measuring tool ,measuring device, measuring instrument, metric,Bosch, Diesel, biodiesel, Injection Pump, diesel timing, timing, tuneup, tune-up VW Volkswagen Audi Volvo BMW Marine penta

email:  toolstore@aol.com





Product Search

News

Events