FLORIDA-TOOLS

KUKKO
HIGH QUALITY GERMAN MADE PULLERS


 


Universal Two-Arm Pullers No.20

Item No. Spread Reach List Price
20 - 1     80 mm 3" 100 mm 4"   $99.50
20 - 10 120 mm 5" 100 mm 4" $107.50



Standard Arms for Pullers No.20
(Sold in Pairs)
Item No. For Puller No. Reach
1- 90-P   20-1 + 20-10 100 mm 4"


Extended Arms for Pullers No.20
(Sold in Pairs)
Item No. For Puller No. Reach
1- 250-P   20-1 + 20-10 250 mm 10"


Three-Arm Pullers No. 12

 

Item No. Spread Reach
12 - 1 100 mm 4" 100 mm 4"
12 - 2 150 mm 6" 125 mm 5"
12 - 3 200 mm 8" 165 mm 6 1/2"

Pullers No.204

 

Item No. Spread Reach
204 - 1   80 mm 3 1/8"   90 mm 3 5/8"
204 - 2 100 mm 4" 100 mm 4"


Separator Pullers No.210

 

Item No. Spread Reach
210 - 1   95 mm 3 3/4" 170 mm 6 3/4"
210 - 2 135 mm 5 3/8" 270 mm 10 5/8"


Separators No.15

 

Item No. Openning A (mm) Distance B (mm) For Pullers No.
15 - 1 12 - 75 75 18 - 1
15 - 2 22 - 115 115 18 - 2


Separators No.17

 

Item No. Openning A (mm) Distance B (mm) For Pullers No.
17 - 0 5 - 60 60 18 - 0
17 - 1 12 - 75 75 18 - 1
17 - 2 22 - 115 115 18 - 2
17 - 3 25 - 155 155 18 - 3


Pulling Devices No. 18

 

Item No. Spread (mm) Length of pulling bolts (mm) For Separator No.
18 - 0 50 - 110 150 15-0, 17-0
18 - 1 60 - 150 200 15-1, 17-1
18 - 2 60 - 200 250 12-2, 17-2, 13-2
18 - 3 80 - 300 300 15-3, 17-3, 13-3


Internal Extractors Nos 21-0 -- 21-9

 

Item No. For Bores of
21 - 0 5 - 8 mm 13/64" - 5/16"
  21 - 00 6 - 10 mm 1/4" - 25/64"
  21 - 01 8 - 12 mm 5/16" - 1/2"
  21 - 02 10 - 14 mm 13/32" - 9/16"
21 - 1 12 - 16 mm 31/64" - 5/8"
21 - 2 14 - 19 mm 35/64" - 3/4"
21 - 3 18 - 23 mm 23/32" - 29/32"
21 - 4 20 -30 mm 7/8" - 1 7/64"
21 - 5 28 - 40 mm 1 27/64" - 1 13/16"
21 - 6 36 - 46 mm 1 27/64" - 1 13/16"
21 - 7 45 - 58 mm 1 25/32" - 2 19/64"
21 - 8 26 - 70 mm 2 13/64" - 2 3/4"
21 - 9 10 - 100 mm 2 3/4" - 3 15/16"


Counterstays Nos 22-1 -- 22-3
Item No. For Nos No. Connection to Internal Extractor
22 - 1 20-1 - 21-5 21-0 - 21-02
with reduction collar
21-1 - 21-5
without reduction collar
22 - 2 20-3 - 21-8 21-3 - 21-5
with reduction collar
21-6 - 21-8
without reduction collar


Slide Hammer Units No. 22-0 and 22-01
Item No. For Nos No.
 22 - 0 20-0 - 21-2
   22 - 01 21-3 - 21-8
21-41 - 21-46

 

 

 

Universal Two-Arm Pullers No.20
Complete pullers with standard arms

Sliding-Arm pullers, with Constantly Parallel Claws
This original KUKKO design has been renowned for decades and proven world-wide under roughest, most demanding conditions.

Advantages
Parallel claw in every position, thus ensuring that only locating surfaces come into contact with the item to be removed.
Powerful construction, high performance, handy design, claw with profile-milled feet for restricted areas. Universal use, replaceable claws for every required reach.
Can be used as an external or internal puller.


Standard Arms for Pullers No.20
Extended Arms for Pullers No.20

 

 

Three-Arm Pullers No. 12
with Preselectable Spread

Strudy pullers with an exellent grippingeffect for removing ball bearings, gears, pulleys etc.
Slenders arms make these tools useful in hard-to-reach places.
Use wrench to set arms to the required spread, thus preventing them from slipping off the part to be removed.

 

 

Separators Nos 15 and 17 with Pulling Device No. 18
For removing tightly seated ball and roller bearings, inner bearing races, gear rims and other parts.

The edges of the separator jaws are forced behind the parts to be withdrawn and pry them off their seats.
For pulling from a shaft, use the separator with a Pulling Device no 18 of suitable size. The bolts of the matching pulling device are screwed into the two tapholes of the separator.

Operation:
Tighten screw against shaft end (Figs 1 and 2). Pulling Devices Nos 18-4 and 18-5 can be used with Hydraulic Screws Nos 8-1-B and 8-2-M.

Hydraulic mode (Fig. 3):
Use spanner (b) to squeeze hollow spindle of Hydraulic screw tightly against shaft end. Turn handle (a) to move inside ram screw and start hydraulic action (Fig. 3). Before operating under pressure, part and pulling device have to be wrapped with canvas or heavy cloth for protection from accidents caused by parts coming unstuck abruptly.





Click here to go into the MAIN STORE and BUY tools





Product Search

News

Events